Filters
Close

Latest News

Here you will find our latest news releases.

HOW TO CHOOSE THE RIGHT MATERIAL FOR YOUR CABLING SOLUTIONS
HOW TO CHOOSE THE RIGHT MATERIAL FOR YOUR CABLING SOLUTIONS

Several factors come into play when selecting a cable. From the core right up to insulation, each wire is made of a number of components and materials that enable its correct functioning. The wrong cable materials can seriously affect the correct functioning of the whole application and cause major damages, often with costly consequences.

Approvals Agencies and Standards
Approvals Agencies and Standards

The wire and cable industry enforces an extensive list of approvals and agency standards, including UL, CSA, IEC, and other National and International safety procedures and regulations. Unsure of the differences between requirements? Learn more about the different types of safety standards here.

LAPP ROBUST Series
LAPP ROBUST Series

The ROBUST series consists of cable and connector solutions for power, control and data transmission, as well as bus, sensor and Ethernet connections. Thanks to their chemical resistance, as well as being highly ozone, UV and weather resistant in compliance with EN 50396 and HD 605 S2 our ROBUST products are certified to be suitable for wet cleaning in the food and beverage industry in accordance with ECOLAB and European and North American standards.

Convert Modbus RTU To PROFINET In 4 Steps
Convert Modbus RTU To PROFINET In 4 Steps

This video provides an example of how to convert Modbus RTU to PROFINET protocol with Moxa’s MGate 5103 Series. Moxa MGate protocol gateways support an easy-to-use web console that guides users to configure the protocol conversion step by step, making the configuration process hassle-free.

Convert Modbus RTU To EtherNet/IP In 4 Steps
Convert Modbus RTU To EtherNet/IP In 4 Steps

This video provides an example of how to convert Modbus RTU to EtherNet/IP protocol with Moxa’s MGate 5105-MB-EIP Series. Moxa MGate protocol gateways support an easy-to-use web console that guides users to configure the protocol conversion step by step, making the configuration process hassle-free.

Icotek IP66/IP68 Cable Gland For Cables With & Without Connectors
Icotek IP66/IP68 Cable Gland For Cables With & Without Connectors

Split cable gland KVT-ER sets new standards in connectorised cable routing. By introducing the all-new split cable gland KVT-ER icotek is setting new standards in connectorised cable entry. The KVT-ER cable gland is a liquid and dust proof (IP66/IP68), rugged, easy-to-install and comparatively very cost-effective solution for routing, sealing and strain relief of cables with or without preassembled connectors.

Exclusive Certified MOXA NZ Partner For More Than 20 Years
Exclusive Certified MOXA NZ Partner For More Than 20 Years

For over twenty years now, ECS has been New Zealand’s exclusive distributor and certified partner of MOXA Automation & Networking products. Our dedicated team of fully trained professionals are here to help guide you through MOXA’s extensive library of quality automation & networking products, engineered for today’s technologies and beyond.

A New Member Of UNITRONIC ROBUST For Harsh Environments
A New Member Of UNITRONIC ROBUST For Harsh Environments

Lapp has extended its range of UNITRONIC® ROBUST low-frequency data network cables with a cable featuring a special resistant sheath material for use in particularly harsh environments. The material is resistant to a range of chemical media, as well as being ozone, UV and weather resistant in compliance with EN 50396 and HD 605 S2.

KT-M Cable Grommet With A Metric Inner Thread
KT-M Cable Grommet With A Metric Inner Thread

The integration of interfaces for signal, data, power and hybrid connectors into icotek split cable entry frames is now possible with the new grommet generation KT-M. They simply can be screwed directly into the KT-M thread as required. The existing grommet model range suitable for icotek cable entry frames KEL, KEL-U or KEL-ER has now been extended with the unique grommet KT-M which is based on the large cable grommet KT.

 

NEW Automatic Crimping Pliers By CIMCO
NEW Automatic Crimping Pliers By CIMCO

New to ECS, CIMCO Automatic Crimping Pliers for turned industrial plug-in contacts. Suitable for 0.35 – 1.5 mm2 turned industrial plug-in contacts from brands such as LAPP, EPIC, Harting, ILME, Phoenix, Amphenol, Walther, HTS, Contact and Weidmüller.